Lab twin-screw extruder is our company research for universities, research institutes and large and medium-sized enterprises engaged in various extrusions, extruded maturation, extruded variability study omnipotent models. It has gone through four genarations of improvements to adapt to cereals, potato, starch, protein, chemicals, plastics, rubber and other raw materials are vastly different for a variety of experiments . Powerful , easy to operate and simply of parameters adjustment, test data accurate, easy maintenance.
Main Features :
1. High strength building block structure screws
2. Compositional barrel
3. Temperature subsection and bilateral controll
4. Multipoint pressure assay
5. Wide rotating speed adjustment range
7. High imitativeness
8. Easy operation
9. Easy maintainance and low cost
| Technical Parameter | |||||
| 1 | Motor power | 5.5 kw | 13 | Control | Concentrate control |
| 2 | Motor timing | Frequency conversion | 14 | Pressure range | 0~30 MPa |
| 3 | Screw diameter | 30 / 32 | 15 | Pressure precision | 1 MPa |
| 4 | Screw centre distance | 26 mm | 16 | Pressure point | 3/1 |
| 5 | Material of screw | 38CrMoAl | 17 | Lubricate mode | Inside Cyc |
| 6 | Rev range | 0~550rpm | 18 | Feed power | 0.18 kw |
| 7 | Screw form | Toy bricks form | 19 | Feed control | Frequency conversion |
| 8 | Length-diameter ratio | 11.6/12.7/23 | 20 | Cutting control | 0.25 kw |
| 9 | Bamboo tempreture | Electricity heater/Water | 21 | Cutting power | Frequency conversion |
| 10 | Tem precision | -1~+1 | 22 | Output | 8-12 kg/h |
| 11 | Tem test point | 4 | 23 | Size | 1.8*1*1.4 M |
| 12 | Tem precision | 20-300 degree | |||
